Basic knowledge of methanol combustion engines

Basic knowledge of methanol combustion engines
Methanol combustion engines are a system that integrates various components such as methanol supply, atomization, air supply, ignition, flame detection, and operation control into one cabinet.It is a device that achieves complete automatic control of the combustion process.

1. Working principle
   The classic introduction-type combustion principle combined with principles of air, automation control, combustion, and so on, enables complete combustion of methanol fuel. It overcomes the problem of using methanol fuels with high impurity content such as second-filtered methanol, spent methanol, and so on, which prevents clogging and pump damage.It also avoids the occurrence of high-pressure pump pressure atomization.
2. Advantages
3. High thermal efficiency: The methanol-based fuel combustion engine uses a dual-layer tangential cyclone system with internal and external layers. The structure is reasonable, combustion is fully, and the thermal efficiency is high.
4. High safety: When the boiler starts, the combustion engine first starts small flames. Only after the small flames are stable and burning properly, the methanol-based fuel combustion engine will open the main gas valve, allowing fuel to enter the boiler and start normal combustion.There will be no explosive combustion phenomenon.
5. Good atomization, low energy consumption, and low noise.
6. High flame stability, high combustion efficiency, and low environmental pollution.
7. Reliable installation and fully automatic control.
   3.Precautions
8. Methanol content used in the methanol combustion engine is minimum 5 kilograms, maximum 50 kilograms, which corresponds to the minimum rated power of the combustion engine of 500,000 kilowatts, and the maximum rated power of 400,000 kilowatts.In fact, its output is related to the combustion heat of methanol-based liquid fuels. As for the industrial boiler, it refers to an industrial boiler that can be used for both burning oil and gas. At present, there are no dual-fuel industrial boilers.This is because the combustion engine must burn oil or gas. There are also no dual-fuel combustion engines. However, with the rapid development of global electromechanical products, some European countries have gradually produced and sold industrial boilers with organic combinations of oil combustion engines, gas combustion engines, and industrial boilers, forming a new type of industrial boiler - oil-natural-gas boiler.

9. The hot air boiler is a thermal power device that gradually gained popularity in China since the late 1970s.It has become a replacement for electric heat sources and traditional steam-powered heat sources in many manufacturing industries. The type of hot air boiler is diverse and the range of its series is comprehensive. It can be divided into two types based on the type of coal used: manual combustion and machine combustion.The types of fuels used are coal, oil, gas stoves, etc. Theoretically, the definition of methanol combustion devices is straightforward. Domestic electric hot water heaters, gas stoves, and even matchboxes can be identified as one type of the combustion device based on its principle.Based on its principle, it can also be defined as a device that transforms the substance of the chemical transformation into a heat source by mixing air and fuel in an appropriate proportion and allowing it to fully burn. It can also be defined as a device that transforms the substance of the chemical transformation into a heat source by using a premixer to mix air and fuel in an appropriate proportion and allow it to fully burn.

   The hot air boiler can also be used in the manufacture of clothes or catering industries for steam and boiling water combustion. This combustion device is suitable for steam boilers or gas boilers. The upgrading and reformulation of industrial boilers must be carried out by professionals.At the same time, the diesel storage tanks and supply lines must be replaced.

   For the production line for spraying and drying, in addition to replacing the diesel combustion machine with methanol combustion machine, diesel storage tanks and pipelines must also be replaced.

   For the manufacture of zinc and aluminum alloys, the same applies.Diesel storage tanks and pipelines must also be replaced.

   The methanol combustion device is mainly used in various electrical and mechanical equipment, such as asphalt heating conductive furnaces, food baking ovens, air conditioners, snow removal machines, incineration furnaces, hot air generators, etc.As long as the diesel tanks and pipelines are replaced with methanol-resistant tanks and pipelines, it has multiple uses. However, the cost is not high, and it is undoubtedly a popular choice for everyone.